Oval Edge-Wound High Current
(DOE)Introduction (DOE)
Oval edge-wound high current resistor (DOE) is the best choice when conditions demand top-notch performance. Token DOE Series are commonly used as a dynamic braking resistor on Transit applications. Built to perform in rugged environments, they feature corrosion resistant stainless steel insulator supports, solid nickel terminals, and special electroless nickel-plated solid copper terminal supports.
The resistance element is made of a stainless steel resistance alloy. Terminals are welded or silver brazed to the oval, spiral edge-wound resistance element. Toothed ceramic insulators isolate the resistance element from the center support. Ceramic end bushings insulate the center support from the mountings.
Order individual replacement units or entire grids with various mounting configurations.
Contact us with your specific needs.
Options :
- Terminal blocks, thermal switches, conduit knockouts, fusing, fans,
and other customer specified requirements are available on request.
Features :
- Power rating from 550W to 3250W
- Resistance nominal tolerance ±10%(K)
- Resistance value range 0.2Ω to 2Ω,
- suitable for high current applications
Applications :
- Power Industrial Machinery Resistors,
- Dynamic Braking Resistors, Load Banks, Motor Starting Resistor,
- Plugging Resistor, Power Load Measurements, Electric Distribution Resistors,
- Instrumentation, Automation Control Installations.
Oval Edge-Wound Dimensions (DOE 550W - 3250W)
|
||||
| Power Rating | A (mm) | B (mm) | Resistance Value Range | |
| 550W | 244.5 | 295 | 0R2~2R | |
| 900W | 335 | 385.5 | ||
| 1200W | 419 | 470 | ||
| 1500W | 505 | 556 | ||
| 1800W | 588 | 638 | ||
| 3250W | 410 | 465 | ||
Performance Specification (DOE)
| TEST ITEM | TEST METHODS | CHARACTERISTICS |
| Resistance tolerance | JIS-C-5202 5-1 | Resistance Nominal Tolerance ±10%(K) |
| Temperature coefficient | JIS-C-5202 5-2 | ±300ppm/°C max. |
| Power rating load | JIS-C-5202 5-4 | R/R ≤ ±(1%+0.1Ω) Surface temperature up 350°C max. |
| Dielectric withstanding voltage | JIS-C-5202 5-7 2000VDC 1 minute Between terminal and anchor stand |
Free of appearance or structural irregularity ΔR/R ≤ ±(1%+0.1Ω) |
| Terminal strength | JIS-C-5202 6-1 500N 30 seconds | Free of appearance or structural irregularity |
| Insulation resistance | JIS-C-5202 5-6 500VDC | 100MΩ min |
| Short-term overload | JIS-C-5202 5-5 1000% rated power 5 seconds |
Free of appearance or structural irregularity ΔR/R ≤ ±(2%+0.1Ω) |
| Vibration | JIS-C-5202 6-3 490m/s2 11ms |
Free of appearance or structural irregularity Surface coating crack ΔR/R ≤ ±(2%+0.1Ω) |
| Remarks | Resistance and resistance tolerance were tested in-house with micro resistance meter. | |
Order Codes (DOE)
| DOE | 1500W | 1R3 | K | F | |||||||||||||||
| 1 | 2 | 3 | 4 | 5 | |||||||||||||||
|
|
|
|
|
|||||||||||||||
Specification Download (DOE)
Download datasheet High Current Low Resistance Value, High Power Resistor (DOE) PDF (312KB).