| 51 - 60 of about 128 for resistance. |
CdS Resistors Components
Photo Resistance(10Lx) (KΩ) , Dark Resistance (MΩ)min , γmin , Response Time(ms) , Rise , Decay , PGM1200 , 250 , 250 , -30 ~ +70 , 560 , 2~5 , 1.0 , 0 ... Photo Resistance(10Lx) (KΩ) , Dark Resistance (MΩ)min , γmin , Response Time(ms) , Rise , Decay , PGM1200-MP , 250 , 250 , -30 ~ +70 , 560 , 2~5 , 1.0 ...
Wirewound Resistors Components
resistance wire (metal alloy) wound on a core (usually a ceramic). , The element assembly is then protected by a coating or enclosure of , insulating material ... Resistance Temp. Coeff. , -55 °C ~ 155 °C , ± 300 PPM / °C , Short Time Overload , 10 times of rated wattage for 5 sec. , ± 2 ... ...
Cement Resistors Passive Components
Cement Resistors - SQ Series are made by winding resistance wires around non-alkaline ceramic core or metal oxide film rod, , which is added with a cement layer of heat and humidity resistant and non- ... box size and power specifications adjusted to resistance requirements. , SQP Dimensions , Type , Dimension (mm) , Resistance Range (Ω) , SQP , W±1 , H±1 , L±1.5 , d±0.05 , ... ...
Resistor Color Code Passive Components
resistance value for the past time. At present, Token resistor color , coding system is applying for automatization. The first three bands , closest to one ... end of the resistor are used to determine the resistance. , The fourth band represents the tolerance of the resistor. Additional , information can be obtained from the first band. Generally, If an , ... ...
CdS Resistors Components
designs also available including different photo resistance and response time specifications adjusted to resistance requirements. , Features－Epoxy or hermetical package , －Reliable Performance ... Photo Resistance(10Lx) (KΩ) , Dark Resistance (MΩ)min , γmin , Response Time(ms) , Rise , Decay , PGM5506 , 100 , 90 , -30 ~ +70 , 540 , 2 ~ 6 , 0.15 ... ...
Metal Oxide Resistors Components
Metal Oxide Resistors - RSS and RSN Series have a resistance element formed by the oxidation , reaction of a vapor or spray of tin chloride solution on the heated , surface of a glass or ceramic rod. The ... also available including different power size and resistance specifications adjusted to resistance requirements. , General Specifications , Type , L , D , H , d ± 0.05 , MAX Working Voltage , ... ...
Precision Resistors Components
resistance value is (most commonly) defined by cutting an insulating , path through the film along the length of the rod while keeping it in rotation. , The ... supporting accurate characteristics over a broad resistance range. , Token precision resistors are primarily designed for precision lines and conform to the RoHS directive and Lead-free. , Precision ... ...
Resistor Resistors
with low stand-alone temperature coefficient and resistance tolerance. , Resistor - Fusible, Cement, Wirewound, Anti-Surge, Precision, CDS, Melf, Composition, Chip , Fusible, Cement, Wirewound, Anti-Surge, ... Resistor - PGM Series are thin film devices which resistance changes with change of the light source. , PGM Series - PDF (400KB) , Dip , 90 ~ 500 mW , Wirewound Resistor - BWW Series , High precision axial ... ...
Resistor Glossary Components
(V) = √Rated Power (W) × Nominal Resistance Value(Ω) , Critical Resistance Value , The maximum nominal resistance value at which the rated power can be loaded without exceeding the maximum ... to the maximum working voltage in the critical resistance value. , Maximum Working Voltage , The maximum value of D.C. voltage or A.C. voltage (commercial frequency effective value) capable of being applied ... ...
Fusible Resistors Components
and fusing time specifications adjusted to resistance requirements. It is specially spiraled to provide , the fusible function with flame retardant coating. Applications , are widely used in constant ... Resistance Temp. Coeff. , -30°C~150°C , ± 200PPM / °C , Short Time Overload , 2 times of rated voltage for 5 sec. , ± 2 % , Temp. ... ...