1. HOME
  2. TOKEN RESISTORS
  3. Power Wirewound Chip
  4. Low DCR Low-Profile Power Inductors - TPSH Series

Low DCR Low-Profile Power Inductors (TPSH) Shielded

Introduction (TPSH)

< >
  • Low-Profile Power Inductors - TPSH series
  • Power Low DCR Inductors (TPSH) Shielded
  • Shielded Low DCR Power Inductors (TPSH)

Token's Low DCR Low-Profile Power Inductors fit into to more protable applications.

Like many components in the industry, power wirewound inductors are being impacted by the trend toward smaller electronic devices with enhanced functionality requiring increased density of components on the board.

Token introduces low-profile, high-current inductor in case size. The TPSH series offers designers a high-current solution using a larger part, without exceeding a profile of 1.1 mm on either side of the PC board.

The miniaturization of battery-powered devices also requires more compact circuit-board designs, and therefore smaller but more-effective inductor designs. Token (TPSH) offers an inductance range from 1.0 μH to 1000.0 μH, and DCR from 0.009Ω to 19.110Ω,.

The (TPSH) inductor serves as a high-performing, space-saving and power-saving solution for low-profile, high-current power supplies and point of load (POL) converters; distributed power systems; voltage regulator module (VRM) and DC-to-DC converter applications in end products including next-generation mobile devices; notebooks, desktop computers, personal multimedia devices, automotive systems, servers, graphic cards, portable gaming devices, and personal navigation systems; and field-programmable gate arrays (FPGAs).

This wire-wound inductor handles high transient current spikes without hard saturation. Packaged in an RoHS-compliant, 100 % lead (Pb)-free shielded, composite construction that reduces buzz noise to ultra-low levels, the new device is specified for an operating temperature range of -25°C to +125°C, with high resistance to mechanical shock, thermal shock, moisture, and vibration.

Custom parts are available on request. Token will also produce devices outside these specifications to meet specific customer requirements, please contact our sales for more information.

Download Complete Datasheet Low DCR Low-Profile Power Inductors (TPSH) PDF.

Features :
  • Magnerically shielded construction.
  • Excellent solderabillity and high heat resistance.
  • Various high power inductors are superior to be high Saturation for surface mounting..
Applications :
  • Power supply for VCRS; OA equipment Digital camera,
  • LCD television set notebook PC, portable communication Equipments, DC/DC converters, etc..

Dimensions & Configurations (TPSH)

SMD Low-Profile Power (TPSH) Dimensions
SMD Low-Profile Power (TPSH) Dimensions
Type A ± 0.3 B ± 0.3 C ± 0.3 D E F G H I
TPSH6011 6.20 6.50 1.10 2.15 2.20 4.90 2.40 4.90 1.10
TPSH6011 6.20 6.50 1.10 2.15 2.20 4.90 2.40 4.90 1.10
TPSH6013 6.20 6.50 1.40 2.15 2.20 4.90 2.40 4.90 1.10
TPSH6018 6.20 6.50 1.80 2.15 2.20 4.90 2.40 4.90 1.10
TPSH6025 6.20 6.50 2.50 2.15 2.20 4.90 2.40 4.90 1.10
TPSH8028 6.20 6.50 2.50 2.15 2.20 4.90 2.40 4.90 1.10
TPSH8030 8.00 8.00 2.80 2.50 2.80 6.00 3.20 5.80 2.00
TPSH8040 8.00 8.00 3.80 2.40 3.20 6.40 3.40 6.20 1.40
TPSH8043 6.20 6.50 2.50 2.15 2.20 4.90 2.40 4.90 1.10
TPSH8045 8.00 8.00 4.30 2.50 3.00 6.00 3.20 5.80 1.40
TPSH8058 8.00 8.00 5.80 2.40 3.20 6.40 3.40 6.20 1.40
TPSH1028 10.0 10.0 2.80 3.40 3.20 7.40 4.00 7.20 1.80
TPSH1030 10.0 10.0 2.80 3.00 4.00 8.20 4.20 8.20 1.40
TPSH1038 10.0 10.0 3.80 3.40 3.20 7.40 4.00 7.20 1.80
TPSH1040 10.0 10.0 3.80 3.00 4.00 8.20 4.20 8.20 1.40
TPSH1050 10.0 10.0 4.80 3.00 4.00 8.20 4.20 8.20 1.40
TPSH1065 10.0 10.0 6.60 3.00 4.00 8.20 4.20 8.20 1.40

Note: Design as Customer's Requested Specifications.

Electrical Characteristics (TPSH6011)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (mA)
TYP.		 Isat (mA)
TYP.
L Q TYP. MAX.
TPSH6011-1R4 1.4 ± 30% 8 100K 7.96M 30 40 140 2600 1800
TPSH6011-2R7 2.7 ± 30% 8 100K 7.96M 48 62 100 2200 1450
TPSH6011-4R7 4.7 ± 30% 8 100K 7.96M 66 86 70 1800 1100
TPSH6011-6R8 6.8 ± 30% 7 100K 7.96M 105 136 55 1400 900
TPSH6011-100 10.0 ± 30% 12 100K 2.52M 170 220 45 1100 720
TPSH6011-150 15.0 ± 30% 10 100K 2.52M 240 320 32 950 620
TPSH6011-220 22.0 ± 30% 10 100K 2.52M 300 390 26 800 480
TPSH6011-330 33.0 ± 30% 10 100K 2.52M 430 560 22 680 380
TPSH6011-470 47.0 ± 30% 10 100K 2.52M 650 850 20 550 320
TPSH6011-680 68.0 ± 30% 12 100K 2.52M 920 1200 18 460 280
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH6013)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (mA)
TYP.		 Isat (mA)
TYP.
L Q TYP. MAX.
TPSH6013-1R0 1.0 ± 30% 12 100K 7.96M 28 36 100 3200 2900
TPSH6013-1R5 1.5 ± 30% 10 100K 7.96M 32 40 90 3000 2400
TPSH6013-2R2 2.2 ± 30% 10 100K 7.96M 40 50 80 2500 2100
TPSH6013-3R3 3.3 ± 30% 10 100K 7.96M 45 60 70 2350 1750
TPSH6013-4R2 4.2 ± 30% 10 100K 7.96M 58 75 55 2100 1500
TPSH6013-6R4 6.4 ± 30% 10 100K 7.96M 85 110 45 1700 1300
TPSH6013-100 10.0 ± 30% 14 100K 2.52M 132 156 35 1400 1100
TPSH6013-150 15.0 ± 30% 12 100K 2.52M 180 235 26 1100 800
TPSH6013-220 22.0 ± 30% 12 100K 2.52M 260 325 22 950 720
TPSH6013-330 33.0 ± 30% 10 100K 2.52M 400 500 18 780 580
TPSH6013-470 47.0 ± 30% 10 100K 2.52M 540 675 14 660 500
TPSH6013-680 68.0 ± 30% 10 100K 2.52M 720 900 10 600 400
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH6018)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (mA)
TYP.		 Isat (mA)
TYP.
L Q TYP. MAX.
TPSH6018-1R2 1.2 ± 30% 8 100K 7.96M 19 25 130 3600 2800
TPSH6018-1R8 1.8 ± 30% 8 100K 7.96M 22 28 90 3000 2300
TPSH6018-3R3 3.3 ± 30% 8 100K 7.96M 28 39 60 2500 1700
TPSH6018-4R7 4.7 ± 30% 8 100K 7.96M 32 42 50 2200 1400
TPSH6018-6R8 6.8 ± 30% 8 100K 7.96M 46 60 40 1900 1200
TPSH6018-100 10.0 ± 30% 12 100K 2.52M 68 88 30 1700 1000
TPSH6018-150 15.0 ± 30% 12 100K 2.52M 100 130 24 1500 800
TPSH6018-220 22.0 ± 30% 14 100K 2.52M 145 190 18 1200 650
TPSH6018-330 33.0 ± 30% 10 100K 2.52M 195 255 16 1000 580
TPSH6018-470 47.0 ± 30% 12 100K 2.52M 315 410 14 800 460
TPSH6018-680 68.0 ± 30% 12 100K 2.52M 455 600 12 620 360
TPSH6018-101 100.0 ± 30% 20 100K 2.52M 550 715 9 550 340
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH6025)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (mA)
TYP.		 Isat (mA)
TYP.
L Q TYP. MAX.
TPSH6025-2R2 2.2 ± 30% 8 100K 7.96M 18.5 24 65 3400 2350
TPSH6025-3R3 3.3 ± 30% 8 100K 7.96M 21.0 27 50 3200 2000
TPSH6025-4R7 4.7 ± 30% 8 100K 7.96M 27.0 35 42 2700 1550
TPSH6025-6R8 6.8 ± 30% 8 100K 7.96M 32.0 42 36 2400 1300
TPSH6025-8R2 8.2 ± 30% 8 100K 7.96M 40.0 52 30 2200 1250
TPSH6025-100 10.0 ± 30% 12 100K 2.52M 44.0 57 25 2000 1050
TPSH6025-150 15.0 ± 30% 12 100K 2.52M 66.0 86 22 1800 920
TPSH6025-220 22.0 ± 30% 12 100K 2.52M 100 130 18 1600 700
TPSH6025-330 33.0 ± 30% 12 100K 2.52M 140 12 65 1200 640
TPSH6025-470 47.0 ± 30% 12 100K 2.52M 190 250 10 1000 480
TPSH6025-680 68.0 ± 30% 10 100K 2.52M 280 500 7 700 350
TPSH6025-101 100.0 ± 30% 24 100K 796K 385 500 7 700 370
TPSH6025-221 220.0 ± 30% 20 100K 796K 950 1250 4 420 240
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH8028)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (A)
TYP.		 Isat (A)
TYP.
L Q TYP. MAX.
TPSH8028-3R3 3.3 ± 30% 12 100K 7.96M 60.0 17.5 23.0 3.60 3.50
TPSH8028-4R7 4.7 ± 30% 15 100K 7.96M 50.0 20.0 26.0 3.70 3.20
TPSH8028-6R8 6.8 ± 30% 13 100K 7.96M 40.0 34.0 45.0 2.80 2.50
TPSH8028-100 10.0 ± 30% 22 100K 2.52M 25.0 45.0 85.0 2.00 1.70
TPSH8028-150 15.0 ± 30% 20 100K 2.52M 20.0 66.0 130.0 1.60 1.50
TPSH8028-220 22 ± 30% 22 100K 2.52M 15.0 147.0 185.0 1.30 1.10
TPSH8028-470 47.0 ± 30% 14 100K 2.52M 12.0 177.0 230.0 1.20 1.00
TPSH8028-680 68 ± 30% 23 100K 2.52M 9.0 317.0 390.0 0.85 0.80
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH8030)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (A)
TYP.		 Isat (A)
TYP.
L Q TYP. MAX.
TPSH8030-3R3 3.3 ± 30% 12 100K 7.96M 55.0 15.6 22.0 5.00 4.60
TPSH8030-4R7 4.7 ± 30% 10 100K 7.96M 42.0 22.6 30.0 4.60 3.80
TPSH8030-6R8 6.8 ± 30% 10 100K 7.96M 30.0 34.5 46.0 3.60 3.20
TPSH8030-100 10.0 ± 30% 18 100K 2.52M 25.0 47.3 60.0 3.00 2.60
TPSH8030-150 15.0 ± 30% 18 100K 2.52M 20.0 75.0 100.0 2.20 2.00
TPSH8030-220 22.0 ± 30% 18 100K 2.52M 16.0 105.0 130.0 2.00 1.75
TPSH8030-330 33.0 ± 30% 16 100K 2.52M 12.0 205.0 260.0 1.45 1.25
TPSH8030-470 47.0 ± 30% 16 100K 2.52M 12.0 205.6 260.0 1.45 1.25
TPSH8030-680 68.0 ± 30% 16 100K 2.52M 9.0 25.6 315.0 1.25 0.96
TPSH8030-101 100.0 ± 30% 24 100K 0.796M 7.0 415.0 520.0 0.85 0.75
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH8040)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (A)
TYP.		 Isat (A)
TYP.
L Q TYP. MAX.
TPSH8040-3R3 3.3 ± 30% 12 100K 7.96M 40.0 13.8 18.0 6.00 5.00
TPSH8040-4R2 4.2 ± 30% 12 100K 7.96M 32.0 16.5 22.0 5.30 4.60
TPSH8040-6R2 6.2 ± 30% 10 100K 7.96M 28.0 25.0 32.0 4.20 4.00
TPSH8040-100 10.0 ± 30% 22 100K 2.52M 20.0 33.0 42.0 3.70 2.90
TPSH8040-150 15.0 ± 30% 20 100K 2.52M 18.0 55.0 70.0 2.80 2.50
TPSH8040-220 22.0 ± 30% 22 100K 2.52M 15.0 88 11.0 2.20 2.05
TPSH8040-330 33.0 ± 30% 22 100K 2.52M 12.0 115.0 150.0 1.90 1.75
TPSH8040-470 47.0 ± 30% 20 100K 2.52M 10.0 150.0 190.0 1.55 1.45
TPSH8040-680 68.0 ± 30% 18 100K 2.52M 8.0 205.0 260.0 1.35 1.10
TPSH8040-101 100.0 ± 30% 25 100K 0.796M 6.0 325.0 410.0 1.05 0.95
TPSH8040-151 150.0 ± 30% 18 100K 0.796M 5.0 445.0 560.0 0.90 0.77
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH8043)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (A)
TYP.		 Isat (A)
TYP.
L Q TYP. MAX.
TPSH8043-1R0 1.0 ± 30% 15 100K 7.96M 70.0 8.1 10.0 6.60 7.50
TPSH8043-2R2 2.2 ± 30% 15 100K 7.96M 65.0 11.2 15.0 5.40 5.20
TPSH8043-3R3 3.3 ± 30% 12 100K 7.96M 54.0 12.5 17.0 5.10 4.50
TPSH8043-3R9 3.9 ± 30% 15 100K 7.96M 42.0 14.6 19.0 4.80 4.00
TPSH8043-4R7 4.7 ± 30% 13 100K 7.96M 36.0 17.0 22.0 4.60 3.60
TPSH8043-100 10.0 ± 30% 27 100K 2.52M 20.0 30.0 40.0 3.50 2.70
TPSH8043-150 15.0 ± 30% 26 100K 2.52M 15.0 46.0 60.0 2.70 2.00
TPSH8043-220 22.0 ± 30% 24 100K 2.52M 12.0 72.5 95.0 2.20 1.70
TPSH8043-330 33.0 ± 30% 21 100K 2.52M 11.0 100.0 130.0 1.70 1.40
TPSH8043-470 47.0 ± 30% 21 100K 2.52M 9.0 120.0 150.0 1.50 1.20
TPSH8043-680 68.0 ± 30% 20 100K 2.52M 7.0 192.0 250.0 1.20 1.00
TPSH8043-101 100 ± 30% 50 100K 0.796M 6.0 287.0 370.0 1.00 0.80
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH8045)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (A)
TYP.		 Isat (A)
TYP.
L Q TYP. MAX.
TPSH8045-3R5 3.5 ± 30% 12 100K 7.96M 45.0 18.8 25.0 5.00 5.00
TPSH8045-4R7 4.7 ± 30% 10 100K 7.96M 30.0 22.0 27.5 4.60 4.40
TPSH8045-6R2 6.2 ± 30% 10 100K 7.96M 23.0 28.5 36.0 4.20 3.80
TPSH8045-100 10.0 ± 30% 16 100K 2.52M 18.0 35.8 48.0 3.50 3.30
TPSH8045-220 22.0 ± 30% 18 100K 2.52M 12.0 94.0 122.0 2.25 2.15
TPSH8045-330 33.0 ± 30% 14 100K 2.52M 8.0 118.0 150.0 2.00 1.80
TPSH8045-470 47.0 ± 30% 12 100K 2.52M 6.0 215.0 270.0 1.45 1.40
TPSH8045-680 68.0 ± 30% 8 100K 2.52M 4.0 320.0 400.0 1.25 1.20
TPSH8045-101 100.0 ± 30% 20 100K 0.70M 3.0 400.0 500.0 1.00 0.92
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH8058)

Part NO Inductance
(µH)		 Q
Ref.		 TEST Freq. DCR (mΩ) SRF (MHz)
TYP.		 Irms (A)
TYP.		 Isat (A)
TYP.
L Q TYP. MAX.
TPSH8058-3R9 3.9 ± 30% 8 100K 7.96M 45.0 12.0 16.0 6.50 4.50
TPSH8058-5R2 5.2 ± 30% 8 100K 7.96M 35.0 14.0 17.5 5.80 3.90
TPSH8058-6R8 6.8 ± 30% 8 100K 7.96M 30.0 16.0 20.0 5.50 4.00
TPSH8058-100 10.0 ± 30% 20 100K 2.52M 14.0 42.0 52.0 3.40 1.80
TPSH8058-220 22.0 ± 30% 20 100K 2.52M 14.0 42.0 52.0 3.40 1.80
TPSH8058-330 33.0 ± 30% 16 100K 2.52M 10.0 58.0 72.0 2.70 1.60
TPSH8058-470 47.0 ± 30% 12 100K 2.52M 7.0 80.0 10.0 2.30 1.50
TPSH8058-680 68.0 ± 30% 16 100K 2.52M 6.0 100.0 130.0 2.00 1.20
TPSH8058-101 100.0 ± 30% 22 100K 0.796M 5.0 124.0 160.0 1.70 0.90
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH1028)

Part NO Inductance
(µH)		 Q
Ref.		 SRF (MHz)
TYP.		 DCR (mΩ) Irms (A)
TYP.		 Isat (A)
TYP.
TYP. MAX.
TPSH1028-1R0 1.0 ± 30% 14 100 4.9 6.5 7.00 8.00
TPSH1028-1R5 1.5 ± 30% 12 80 7.3 10.0 6.50 6.50
TPSH1028-2R2 2.2 ± 30% 12 65 11.0 15.0 5.30 4.80
TPSH1028-3R3 3.3 ± 30% 14 55 15.0 20.0 4.60 4.30
TPSH1028-4R7 4.7 ± 30% 12 40 16.5 3.0 4.50 3.80
TPSH1028-6R8 6.8 ± 30% 12 30 25.0 33.0 3.50 3.00
TPSH1028-8R2 8.2 ± 30% 12 28 28.5 37.0 3.30 2.70
TPSH1028-100 10.0 ± 30% 20 25 40.0 53.0 2.80 2.40
TPSH1028-150 15.0 ± 30% 26 22 69.0 90.0 2.00 2.00
TPSH1028-220 22.0 ± 30% 26 16 104.0 135.0 1.60 1.40
TPSH1028-330 33.0 ± 30% 24 12 139.0 180.0 1.25 1.20
TPSH1028-470 47.0 ± 30% 20 11 167.0 230.0 1.30 1.10
TPSH1028-560 56.0 ± 30% 22 10 208.0 270.0 1.10 1.00
TPSH1028-680 68.0 ± 30% 20 9 232.0 300.0 1.00 0.90
TPSH1028-820 82.0 ± 30% 20 8 323.0 420.0 0.90 0.85
TPSH1028-101 100.0 ± 30% 20 7 365.0 470.0 0.85 0.80
TPSH1028-121 120.0 ± 30% 18 6 428.0 560.0 0.65 0.70
TPSH1028-151 150.0 ± 30% 18 5 518.0 680.0 0.70 0.65
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH1030)

Part NO Inductance
(µH)		 Q
Ref.		 SRF (MHz)
TYP.		 DCR (mΩ) Irms (A)
TYP.		 Isat (A)
TYP.
TYP. MAX.
TPSH1030-4R7 4.7 ± 30% 14 36 25.0 32.5 4.20 4.40
TPSH1030-6R2 6.2 ± 30% 12 30 32.0 42.0 3.80 3.90
TPSH1030-100 10.0 ± 30% 16 26 44.0 58.0 3.00 3.10
TPSH1030-150 15.0 ± 30% 16 22 73.0 95.0 2.60 2.55
TPSH1030-220 22.0 ± 30% 16 18 110.0 145.0 2.00 2.10
TPSH1030-330 33.0 ± 30% 12 14 150.0 195.0 1.70 1.74
TPSH1030-470 47.0 ± 30% 14 12 210.0 270.0 1.40 1.35
TPSH1030-680 68.0 ± 30% 14 10 285.0 370.0 1.20 1.22
TPSH1030-101 100.0 ± 30% 14 8.5 395.0 520.0 1.10 1.02
TPSH1030-151 150.0 ± 30% 12 5.5 640.0 840.0 0.85 0.84
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH1038)

Part NO Inductance
(µH)		 Q
Ref.		 SRF (MHz)
TYP.		 DCR (mΩ) Irms (A)
TYP.		 Isat (A)
TYP.
TYP. MAX.
TPSH1038-1R5 1.5 ± 30% 14 65 5.2 7.5 7.20 7.00
TPSH1038-2R2 2.2 ± 30% 12 55 7.7 10.5 6.80 6.50
TPSH1038-3R5 3.5 ± 30% 14 35 11.5 15.0 5.50 5.50
TPSH1038-5R0 5.0 ± 30% 12 30 14.5 22.0 4.60 4.80
TPSH1038-6R2 6.2 ± 30% 12 25 16.5 24.0 4.00 4.20
TPSH1038-100 10.0 ± 30% 24 20 25.0 35.0 3.80 3.60
TPSH1038-150 15.0 ± 30% 24 16 37.0 50.0 2.80 2.70
TPSH1038-220 22.0 ± 30% 20 12 55.8 75.0 2.20 2.30
TPSH1038-330 33.0 ± 30% 22 10 86.0 112.0 1.80 1.80
TPSH1038-470 47.0 ± 30% 22 8 121.0 160.0 1.65 1.60
TPSH1038-680 68.0 ± 30% 24 6 220.0 300.0 1.30 1.10
TPSH1038-101 100.0 ± 30% 24 6 220.0 300.0 1.30 1.10
TPSH1038-151 150.0 ± 30% 20 5 358.0 476.0 0.90 0.80
TPSH1038-221 220.0 ± 30% 22 4 565.0 740.0 0.65 0.65
TPSH1038-331 330.0 ± 30% 20 3 773.0 1000.0 0.55 0.52
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH1040)

Part NO Inductance
(µH)		 Q
Ref.		 SRF (MHz)
TYP.		 DCR (mΩ) Irms (A)
TYP.		 Isat (A)
TYP.
TYP. MAX.
TPSH1040-5R0 5.0 ± 30% 12 28.0 17.5 23.0 5.20 4.70
TPSH1040-6R2 6.2 ± 30% 12 24.0 21.5 28.0 4.70 4.30
TPSH1040-100 10.0 ± 30% 16 22.0 32.0 42.0 4.40 3.80
TPSH1040-150 15.0 ± 30% 18 16.0 60.0 78.0 2.90 2.80
TPSH1040-220 22.0 ± 30% 16 12.0 75.0 98.0 2.55 2.48
TPSH1040-330 33.0 ± 30% 16 10.0 110.0 140.0 2.05 2.00
TPSH1040-470 47.0 ± 30% 16 8.0 170.0 22.0 1.62 1.56
TPSH1040-680 68.0 ± 30% 16 7.0 245.0 320.0 1.45 1.40
TPSH1040-101 100.0 ± 30% 14 6.0 320.0 415.0 1.18 1.14
TPSH1040-221 220.0 ± 30% 14 4.0 760.0 950.0 0.78 0.72
TPSH1040-331 330.0 ± 30% 14 2.5 1080.0 1350.0 0.62 0.60
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH1050)

Part NO Inductance
(µH)		 Q
Ref.		 SRF (MHz)
TYP.		 DCR (mΩ) Irms (A)
TYP.		 Isat (A)
TYP.
TYP. MAX.
TPSH1050-4R7 4.7 ± 30% 13 34.0 14.5 19.0 5.20 5.10
TPSH1050-100 10.0 ± 30% 16 20.0 26.0 34.0 4.40 3.80
TPSH1050-220 22.0 ± 30% 16 10.0 58.0 76.0 2.90 2.70
TPSH1050-330 33.0 ± 30% 14 8.5 70.0 90.0 2.70 2.10
TPSH1050-470 47.0 ± 30% 14 7.0 100.0 130.0 2.10 1.80
TPSH1050-680 68.0 ± 30% 14 6.5 144.0 186.0 1.75 1.45
TPSH1050-101 100.0 ± 30% 16 5.0 198.0 260.0 1.50 1.25
TPSH1050-151 150.0 ± 30% 16 4.0 330.0 430.0 1.15 1.05
TPSH1050-221 220.0 ± 30% 14 3.5 470.0 610.0 0.95 0.88
TPSH1050-331 330.0 ± 30% 11 2.5 690.0 900.0 0.84 0.70
TPSH1050-471 470.0 ± 30% 11 1.9 1050.0 1350.0 0.65 0.55
TPSH1050-681 680.0 ± 30% 11 1.6 1350.0 1760.0 0.56 0.48
TPSH1050-102 1000.0 ± 30% 30 1.4 2120.0 2760.0 0.47 0.40
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Electrical Characteristics (TPSH1065)

Part NO Inductance
(µH)		 Q
Ref.		 SRF (MHz)
TYP.		 DCR (mΩ) Irms (A)
TYP.		 Isat (A)
TYP.
TYP. MAX.
TPSH1065-4R2 4.2 ± 30% 14 45 18.0 23.0 5.60 7.00
TPSH1065-6R5 6.5 ± 30% 13 28 28.0 35.0 5.00 7.00
TPSH1065-100 10.0 ± 30% 14 20 33.0 41.0 4.90 4.00
TPSH1065-220 22.0 ± 30% 16 12 58.0 73.0 3.80 2.80
TPSH1065-330 33.0 ± 30% 10 7 93.0 120.0 2.70 2.40
TPSH1065-470 47.0 ± 30% 10 6 165.0 210.0 2.10 2.10
TPSH1065-680 68.0 ± 30% 8 5 195.0 250.0 1.85 1.75
TPSH1065-101 100.0 ± 30% 13 4 234.0 290.0 1.80 1.40
Note:
  • Measuring Frequency. L: 100KHz/0.25v.
  • IDC:The current when the inductance becomes 35% lower than its nominal value. and temperature rise 40°C Δt = 40°C (ta = 20°C).

Order Codes (TPSH)

TPSH6011 - 1R0 M
1 23
Part Number
TPSH6011 TPSH6013 TPSH6018
TPSH6025 TPSH8028 TPSH8030
TPSH8040 TPSH8043 TPSH8045
TPSH8058 TPSH1028 TPSH1030
TPSH1038 TPSH1040 TPSH1050
TPSH1065
 
Inductance
1R0 1.00µH
120 12.00µH
220 22.00µH
101 100.00µH
102 1000.00µH
Tolerance
J ±5%
K ±10%
L ±15%
M ±20%
P ±25%
N ±30%