POWER INDUCTOR

Power Inductor THT - TC1213/1213A/1213B Series

Power Inductor can be customed designs and tighter tolerances available on request. Application of power inductor specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Token power inductor is primarily designed for choking power lines and conform to the RoHS directive and Lead-free. Power Inductor is used extensively in analog circuits and signal processing. Power Inductor is usually constructed as a coil of conducting material, typically copper wire, wrapped around a core either of air or of ferrous material.

POWER INDUCTOR THROUGH HOLE INDEX - POWER INDUCTOR INDEX
Power Inductor TC1213 Series - Large Current, Low DCR Inductor
Power Inductor TCDA Series - Large Current Through Hole Power Inductor, Low DCR
Power Inductor TCTC Series - Toroidal Inductor in Low Loss Powdered Iron Cores, Low EMI
Power Inductor TCTK Series - Toroidal Inductor with vertical base mounted
Power Inductor TCPC Series - Choke Coils with molded construction
Power Inductor TCLP/TCVP Series - Low DCR Surface Mounting, High Saturation Inductor
Power Inductor TC19 Series - Through Hole Gap Toroidal Inductor
Inductor Air Core Coils TCAC Series - High Q, High Frequency Inductor Through Hole
Choke Coils TCB7T Series - Choke Inductor Common Mode Through Hole
Choke Coils Radial TCRC Series - Covers low inductance range of RB Series
Choke Coils Radial TCRB Series - High Rated Current, Rugged Reliability Fixed Inductor
Choke Coils Radial Shielded TCRS Series - Space Savings, Wide Inductance Range
Inductor Fixed Type TCAL Series - Provides 0204, 0307, 0410, and 0510 Size
Inductor Filter Ferrite Beads TCFB Series - Radio Frequency Interference Suppression
Inductor Filter Coils Wide Band Chokes TCWB Series - Excellent EMI Suppression Capability
Transformers TCER Series - Mini-Transformer and Automatically Seals

Features
－ Large Current and Low DCR
Applications
－ Mother Board of PC
－ Mother Board of Notebook

Configurations & Dimensions (unit: mm)

power inductor

Type	A(max)	B(max)	C ± 1.0	D(max)	E(Ref.)	F(Ref.)	G	H	I
TC1213	14.0	14.5	5.0	9.5	7.0	5.0	7.5	5.5	1.8
TC1213A	14.0	14.5	5.0	9.5	7.0	5.0	7.5	5.5	1.8
TC1213B	14.5	14.5	5.0	9.5	7.0	5.0	7.5	5.5	1.8

Note: Design as Customer's Requested Specifications.

Electrical Characteristics

Part Number	Inductance(µH)	Test Freq.(KHz)	DCR (Ω)(max)	Peak Current (A) (max)	Irms (A)(max)
TC1213 - R68N	0.68	100	0.0015	40.00	20.00
TC1213A - R33N	0.33	100	0.0015	40.00	20.00
TC1213B - 1R0N	1.00	100	0.0015	35.00	20.00

Note: Test Freq.: 100KHz / 0.1V.

Operating Temp.: -40°C ~ +85°C

Inductance drop = 10% typ. at Peak Current.

ΔT=40°C rise at Irms.

How to Order

TC1213B

-

1R0

N

Type

Power inductor THT:
(TC1213, TC1213A, TC1213B)

Inductance

R68(0.68µH)
1R0(1.00µH)

Tolerance

N ( 30% )

To Top Page - Power Inductor

TOKEN PASSIVE COMPONENTS
Taiwan Tel:+886-2-29810109 Fax:+886-2-29887487
China Tel:+86-755-26055363 Fax:+86-755-26055365