Chip Current Sense Metal Strip Resistors

(LRC)

Packing Quantity Metal Strip Resistor (LRC)

Type Emboss Plastic Tape
LRC12 (2512) 2,000
LRC10 (2010) 2,000
LRC06 (1206) 2,000

Emboss Plastic Tape Specifications (LRC)

Current Sensing Chip (LRC) Emboss Plastic Tape SpecificationsCurrent Sensing Chip (LRC) Emboss Plastic Tape Specifications
Size Resistance
(mΩ)
A B W E F P0 P1 P2 ΦD0 ΦD1 T
LRC12 0.50~7 3.40±0.1 6.73±0.1 12.0±0.1 1.75±0.1 5.5±0.05 4.0±0.1 4.00±0.1 2.0±0.05 1.50±0.10 1.4min 0.81±0.1
0.50~15 3.40±0.1 6.75±0.1 12.0±0.1 1.75±0.1 5.5±0.05 4.0±0.1 4.00±0.1 2.0±0.05 1.55±0.05 1.4min 0.80±0.1
LRC10 1~10 2.85±0.1 5.55±0.1 12.0±0.2 1.75±0.1 5.5±0.05 4.0±0.1 4.00±0.1 2.0±0.05 1.55±0.05 1.4min 0.85±0.1
LRC06 1~10 1.90±0.1 3.60±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.00±0.1 2.0±0.05 1.55±0.05 1.0min 0.87±0.1
Notice :

1. The cumulative tolerance of 10 sprocket hole pitch is ±0.2mm.
2. Carrier camber shall be not more than 1mm per 100mm through a length of 250mm.
3. A & B measured 0.3mm from the bottom of the packet.
4. t measured at a point on the inside bottom of the packet to the top surface of the carrier.
5. Pocket position relative to sprocket hole is measured as the true position of the pocket and not the pocket hole.

Derating Curve (LRC)

(LRC) Power Derating Curve(LRC) Power Derating Curve

Environmental Characteristics (LRC)

Item Specification Test Method
Black coating Green coating
Thermal Shock
±0.5%
±1%
-55°C~150°C, 100 cycles
MIL-STD-202 Method 107G
Short Time Overload
±0.5%
±1%
5*Rated Power for 5 seconds
JIS-C-5202-5.5
Endurance
±1%
±1%
70±2°C, Max. working voltage for 1000 hrs with 1.5 hrs and 0.5 hrs
Dry Heat
±1%
±1%
at +170°C for 1000 hrs
Resistance to Soldering Heat
±0.5%
±1%
260±5°C, for 10 seconds
MIL-STD-202F Method 210E
Solderability
95% min coverage
245±5°C for 3 seconds
MIL-STD-202F Method 210E
Temperature Coefficient of Resistance
As Spec.
+25/-55/+25/+125/+25°C
MIL-STD-202 Method 304
  • Green coating can't be work with wave soldering bath.
  • Humidity < 80%RH; Storage Temperature: 25±3°C

Order Codes (LRC)

LRC 12 H TR D   R011 G
12345678
Part Number
Dimensions
(L×W)(mm)
12 6.3×3.1mm EIA2512
10 5.1×2.5mm EIA2010
06 3.2×1.6mm EIA1206
Resistance
Tolerance (%)
J ±5%
H ±3%
F ±1%
Package
TR Taping Reel
TCR (PPM/°C)
D ±50PPM/°C
W ±75PPM/°C
E ±100PPM/°C
K ±150PPM/°C
Power Rating
  Standard
A 1.5W
S 2W
R 3W
B 2.5W
Resistance (Ω)
0m50 0.00050Ω
0m75 0.00075Ω
1m50 0.00150Ω
R011 0.01100Ω
R002 0.00200Ω
R020 0.02000Ω
Protective
Coating
  Black Coating
G Green Coating
**2010/1206 No coating / marking