AEC-Q200 Metal Alloy High Power Current-Sensing Chip Resistors (LREA)
AEC-Q200 Current-Sensing Resistors (LREA) Introduction
Token AEC-Q200 High Power Current Sensing Chips (LREA) Compliant for your Automotive & Transportation Solutions.
Token electronics AEC-Q200 current sensing resistor (LREA) offer excellent stability, high power, small size, excellent heat dissipation and high solder-joint reliability which make them excellent for design into Electric Vehicles, Hybrid Electric Vehicles, Automatic and Continuously Variable Transmission systems and other vehicle power applications.
Power metal alloy strip current sense surface-mount resistors (LREA) provide superior performance in high temperature applications with a wide range of package sizes in 1206/2512/2725/4527 and choice of resistance values from 0.25 mΩ to 1Ω. The (LREA) resistors deliver overload capabilities equivalent to wirewound devices with high power handling (Up to 5W) and temperature coefficients as low as ±50 ppm/°C.
AEC-Q200 (LREA) current-sensing chip resistors are qualified for automotive systems to provide engineers additional assurance that they are designing in a robust and reliable component. The device is optimized for electronic controls, including chassis, driver information electronics, engine, and climate controls and ideal for all types of pulse and current sensing applications including linear power supplies and switching, instruments, power amplifiers and shunts.
To maximise energy conversion efficiency and reduce power consumption, current sense resistors ought to be from the lowest ohmic value, the highest pulse and surge possible. Token Current-sensing (LREA) resistors allow control circuitry to watch the level of current in a circuit by converting current into a voltage that can be monitored with exceptional efficiency such as typical applications in modern battery-operated equipment.
Token electronics delivers the right chip for your low range, current-sense applications. For standard parts please link to High Power Low Value Current Sensing Chip Resistors (LRE) Metal Strip. For more detailed product information and data sheets or to discuss your specific requirements please contact Token electronics.
Downloads Complete Specification PDF AEC-Q200 Metal Alloy Current-Sensing Chips (LREA).
- Wide range package sizes 1206/2512/2725/4527.
- High power rating up to 5 Watts, Low TCR down to ±50 ppm/°C.
- Resistance values 0.25mΩ to 1Ω, Customized resistance available.
- AEC-Q200 Compliance, RoHS compliant and Halogen free.
- Power Management for NB, MB, Monitor.
- SWPS DC-DC Converter, Charger, Adaptor, Power Supplies, shunts.
- Electric Vehicles, Automatic and Continuously Variable Transmission.
- Hard Disk Drives: Solid-state hard drives (SSD), Solid-state hybrid drives (SSHD).
- The resistive layer is covered with a protective coat, and two external end terminations are added.
- Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the metal alloy.
- Wrap-around terminations have an electroplated nickel barrier and pure Tin (lead free) or matte-tin finish, ensuring excellent "leach" resistance properties and solderability.
Metal Alloy Chip (LREA) Construction & Dimensions
Metal Alloy AEC-Q200 Chip (LREA) Construction & Dimensions
|
| Type | Power Rating at 70℃ (W) | Resistance Range (mΩ) | Dimensions (Unit: mm) | |||
| L | W | T | D | |||
| LREA1206 | 1 | 1.0~2.0 | 3.200±0.254 | 1.650±0.254 | 0.670±0.254 | 0.508±0.254 |
| 3.0~100.0 | 3.200±0.254 | 1.650±0.254 | 0.490±0.254 | 0.508±0.254 | ||
| LREA2512 | 2 | 0.5~1.0 | 6.350±0.254 | 3.050±0.254 | 0.670±0.254 | 2.200±0.254 |
| 1.5 | 0.560±0.254 | 2.000±0.254 | ||||
| 2.0 | 1.400±0.254 | |||||
| 2.5~100.0 | 1.100±0.254 | |||||
| 101.0~450.0 | 0.610±0.254 | 0.850±0.254 | ||||
| 3 | 0.5~1.0 | 0.670±0.254 | 2.200±0.254 | |||
| 1.5 | 2.000±0.254 | |||||
| 2.0 | 1.400±0.254 | |||||
| 2.5~50.0 | 1.100±0.254 | |||||
| 51.0~100.0 | 0.740±0.254 | 1.100±0.254 | ||||
| LREA2725 | 4 | 0.25 | 6.800±0.254 | 6.350±0.254 | 0.820±0.254 | 2.300±0.254 |
| 0.5 | 0.690±0.254 | |||||
| 1 | 0.690±0.254 | 1.800±0.254 | ||||
| 1.5~3.0 | 0.610±0.254 | |||||
| LREA4527 | 3 | 501.0~680.0 | 11.300±0.500 | 6.600±0.500 | 0.770±0.254 | 2.000±0.254 |
| 681.0m~1.0R | 0.690±0.254 | |||||
| 5 | 1.0 | 0.790±0.254 | 3.000±0.254 | |||
| 1.5 | 0.840±0.254 | 2.000±0.254 | ||||
| 2.0~500.0 | 0.840±0.254 | |||||
AEC-Q200 Chip Resistors (LREA) Electrical Specifications
| Type | Max. Rating Power (W) | Max. Rating Current (A)* | Max. Overload Current (A) | Resistance Range (mΩ)* | TCR (ppm/°C) | Operating Temperature (°C) | |
| D (±0.5%) | F (±1%); G (±2%); J (±5%) |
||||||
| LREA1206 | 1 | 31.62 | 54.77 | 7.0~100.0 | 1.0~100.0 | ±50 | -55~+170°C |
| LREA2512 | 2 | 63.25 | 141.42 | 7.0~450.0 | 0.5~450.0 | ||
| 3 | 77.46 | 134.16 | 7.0~100.0 | 0.5~100.0 | |||
| LREA2725 | 4 | 126.49 | 252.98 | -- | 0.25~3.0 | ||
| LREA4527 | 3 | 2.45 | 4.24 | 501m~1.0R | 501m~1.0R | ||
| 5 | 70.71 | 122.47 | 7.0~500.0 | 1.0~500.0 | |||
- Note: Rating Current I= √ ( P / R ) or Max. Rating Current whichever is lower.
- Special tolerance and range of resistance are under requested.
Recommend Land Pattern (LREA)
|
||||||
| Type | Maximum Power Rating (Watts) | ResistanceRange (mΩ) | Dimensions (Unit: mm) | |||
| a | b | i | ||||
| LREA1206 | 1.0 | 1.0 ~100.0 | 1.60 | 2.18 | 0.66 | |
| LREA2512 | 2.0 & 3.0 | 0.5 ~1.5 | 3.05 | 3.68 | 1.27 | |
| 2.0 ~ 3.5 | 2.11 | 3.68 | 3.18 | |||
| 3.6 ~ 450.0 | 1.90 | 3.68 | 3.50 | |||
| LREA2725 | 4.0 | 0.25 ~ 0.5 | 3.18 | 6.86 | 1.32 | |
| 1.0 ~ 3.0 | 2.34 | 6.86 | 3.00 | |||
| LREA4527 | 3.0 & 5.0 | 1.0 ~ 3.0 | 4.50 | 8.74 | 4.50 | |
| 3.5 ~100.0 | 3.40 | 8.74 | 6.43 | |||
| 101.0m ~ 1R | 2.93 | 8.74 | 7.63 | |||
Reel Specifications (LREA)
|
|||||||||
| Reel Type / Tape | W | M | A | B | C | D | |||
| 7” reel for 8 mm embossed (LREA0805 & 1206 series only) | 12.00± 0.5 | 178 ± 1.0 | 2.0 ± 0.5 | 13.2 ± 0.5 | 17.7 ± 0.5 | 60.0 ± 0.5 | |||
| 7” reel for 12 mm embossed | 16.2 ± 0.5 | 178 ± 1.0 | 2.5 ± 0.5 | 13.5 ± 0.5 | 17.7 ± 0.5 | 60.0 ± 0.5 | |||
| 7” reel for 24 mm embossed (LREA4527 series only) | 24.4 +2/-0 | 178 ± 1.0 | 2.0 ± 0.5 | 13.2 ± 0.5 | 17.7 ± 0.5 | 60.0 ± 0.5 | |||
Emboss Plastic Tape Specifications (LREA)
|
|||||||||||||
| Type | A±0.1 | B±0.1 | W±0.3 | E±0.1 | F±0.1 | P0±0.1 | P1±0.3 | P2±0.1 | ΦD0±0.05 | ΦD1±0.1 | T±0.1 | ||
| LREA1206 | 2.03 | 3.55 | 8.0 | 1.75 | 3.5 | 4.0 | 4.0 | 2.0 | 1.55 | 1.00 | 0.70 | ||
| LREA2512 | 3.50 | 6.75 | 12.0 | 1.75 | 5.5 | 4.0 | 4.0 | 2.0 | 1.55 | 1.55 | 0.90 | ||
| LREA2725 | 6.81 | 7.16 | 12.0 | 1.75 | 5.5 | 4.0 | 8.0 | 2.0 | 1.55 | 1.55 | 1.05 | ||
| LREA4527 | 7.38 | 12.0 | 24.0 | 1.75 | 11.5 | 4.0 | 12.0 | 2.0 | 1.55 | 1.55 | 1.05 | ||
- The cumulative tolerance of 10 sprockets hole pitch is ± 0.2mm.
- Carrier camber shall be not more than 1mm per 100mm through a length of 250mm.
- A & B measured 0.3mm from the bottom of the packet
- T measured at a point on the inside bottom of the packet to the top surface of the carrier.
- Pocket position relative to sprocket hole is measured as the true position of the pocket and not the pocket hole.
Packaging Quantity (LREA)
| Type | Tape Width | Diameter | Piece/Reel |
| LREA1206 | 8 mm/embossed plastic | 178 mm/7” | 5,000 |
| LREA2512 | 12 mm/embossed plastic | 178 mm/7” | 4,000 |
| LREA2725 | 12 mm/embossed plastic | 178 mm/7” | 2,000 |
| LREA4527 | 24 mm/embossed plastic | 178 mm/7” | 1,000 |
Derating Curve (LREA)
 |
Soldering Condition (Reflow soldering only) (LREA)
 |
Environmental Characteristics (LREA)
| Item | Requirement | Test Method | ||
| Temperature Coefficient of Resistance (T.C.R.) | As Spec. | JIS C 5201-1 4.8 +25/+150°C | ||
| Short Time Overload | LREA4527: ΔR/R0≤±2.0% The others: ΔR/R0≤±0.5% |
JIS C 5201-1 4.13 Rating power duration: 5secs. | ||
| Type | Power | Multiple | ||
| LREA1206 | 1.0W | 3 times | ||
| LREA2512 | 2.0W | 5 times | ||
| LREA2512 | 3.0W | 3 times | ||
| LREA2725 | 4.0W | 4 times | ||
| LREA4527 | 3.0W, 5.0W | 3 times | ||
| Solderability | 95% Min. coverage | JIS-C5201-1 4.17 245±5°C for 3 seconds | ||
| Resistance to Soldering Heat | ΔR/R0≤± 0.5% | JIS-C5201-1 4.18 260±5°C for 10 seconds | ||
| Temperature Cycling | ΔR/R0≤± 0.5% | JIS-C5201-1 4.19 -55°C ~ 150°C, 1000 cycles | ||
| High Temperature Exposure (Storage) | LREA4527: ΔR/R0≤±2.0% The others: ΔR/R0≤±1.0% | JIS-C5201-1 4.23.2 +170°C for 1000 Hrs. | ||
| Bias Humidity | ΔR/R0≤± 0.5% | JIS-C5201-1 4.24 +85°C/85%RH for 1,000Hrs. with 1.5Hrs “ON”, 0.5Hr “OFF”. | ||
| Load Life | LREA4527: ΔR/R0≤±2.0% The others: ΔR/R0≤±1.0% | JIS-C5201-1 4.25 80±2°C, RCWV for 1000 Hrs. with 1.5 Hrs. “ON” and 0.5 Hr. “OFF” | ||
Order Codes (LREA)
| LREA | 2725 | F | TR | D | 4 | R010 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||